Gate Parts & Welding Cost in Aurora - What It Actually Costs, Quoted Free

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 361-5021

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Parts & Welding Cost in Aurora?

Gate part and welding work in Aurora typically runs $180 to $650 for common repairs, while a full operator and control-board rebuild can reach $450 to $1,400 depending on the brand and gate type. Most single-part repairs, like a new receiver, roller, hinge, or welded hinge bracket, fall between $180 and $340. The written estimate always sets the final price, and estimates are free.

We work on both residential and commercial electric gates, from Mighty Mule and Ghost Controls units on a home driveway to FAAC, BFT, and DoorKing operators running high-cycle property or HOA gates. Our technicians have up to 9 years of experience across nine gate brands, so the part you need and the welding it requires get sorted in one visit rather than three.

Key Takeaways

  • Most gate part and welding repairs in Aurora land between $180 and $650.
  • Replacing a control board or operator assembly is the biggest driver of cost, from $450 to $1,400.
  • Welded hinge, post, and bracket repairs usually cost $200 to $500.
  • Free estimates, upfront pricing, and a written estimate before any work starts.
  • We repair or replace, so the same call covers both outcomes.

Gate Parts & Welding Cost Breakdown (2026)

Here’s how the numbers shake out for the Aurora market in 2026. These are typical ranges for the work itself, parts and labor together. Slide gates, swing gates, and barrier arms all price a little differently, and brand availability moves the parts line up or down.

Job Typical Aurora Range
Welded hinge, bracket, or post repair $200 – $500
Gate frame and panel welding $250 – $650
Replacement rollers, hinges, and hardware $180 – $340
Safety edge, photo-eye, or loop sensor replacement $220 – $450
Receiver and remote/keypad parts $180 – $380
Control board replacement $350 – $800
Operator motor and gearbox assembly $450 – $1,200
Full operator replacement, single residential gate $700 – $1,400

What pushes a job toward the top of a range? Parts for heavier commercial operators, like a DoorKing slide operator or a FAAC barrier arm, cost more than a residential Mighty Mule receiver. Welding on a badly rusted or bent frame takes longer than re-welding a clean hinge bracket, since the metal has to be ground back and prepped before it holds. A gate that’s been out of alignment for months often needs both welding and new hardware, which stacks the two line items together.

What pulls a job toward the bottom? A single failed component with good access. If the gate still swings or slides true and the only issue is a receiver that won’t pair, or a photo-eye that’s been bumped, the repair is quick and the part is common.

What Affects Gate Parts & Welding Pricing in Aurora

  • Brand and part availability. We work with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for all nine brands vary in price, and older or discontinued boards can cost more to source than a current model. Higher-price operators usually sit on commercial gates with heavier parts.
  • Residential versus commercial duty. A residential swing gate on a Mighty Mule or Ghost Controls opener is built for a handful of cycles a day. A commercial DoorKing or FAAC operator on an HOA entrance or a business lot runs far more cycles, and its motor, gearbox, and control board are built heavier and priced heavier. Matching the part to the duty cycle is what keeps the gate working, and that’s the first thing we check.
  • Welding prep and metal condition. A clean weld on a solid frame is straightforward. Rust, cracked steel, or a bent post means grinding, straightening, and sometimes reinforcing before the weld holds. Aurora’s freeze-thaw swings in late winter and early spring work gate hardware hard, so hinge and post welds are the most common metal repair we see in the area.
  • Gate type and size. Slide gates carry rollers, track, and a heavy frame; swing gates carry hinges and an arm or underground operator. A wide commercial slide gate with a long welded frame costs more to repair than a standard residential single swing.
  • Wiring and controls. Automated gates have low-voltage control wiring, receivers, safety edges, and photo-eyes. If wiring has been chewed or waterlogged, the repair includes tracing and replacing it, not just swapping a part.
  • Access and gate position. A gate that’s stuck half-open can’t be worked on safely until it’s stabilized. A gate tucked behind landscaping or tight to a fence line takes longer to reach the failed part.

How to Save on Gate Parts & Welding

The single biggest saver is calling before a small problem becomes a big one. A photo-eye that’s out of alignment or a hinge that’s working loose is a modest repair. Left alone, a loose hinge tears the weld out of the frame, and a misaligned gate drags its roller or arm until the operator burns out. Catching it early keeps you at the low end of the ranges above.

  • Get a written estimate first. Free estimates mean you see the part and labor line before anyone touches the gate. Call (866) 361-5021 to book one.
  • Find out the brand and model before you call. If you already know your gate is a LiftMaster or a FAAC, tell us. It speeds up the parts search and can save a return visit. The label is usually on the operator housing.
  • Repair the failing part, not the whole operator, when it makes sense. A control board or receiver often fixes a dead gate at a fraction of a full operator replacement. We’ll tell you honestly whether repair or replace is the better call for your gate.
  • Fix the metal before it spreads. A small weld repair now costs far less than a rebuilt frame later. Have loose hinges, cracked brackets, and bent posts addressed while they’re still small.
  • Keep the gate path clear. Debris, gravel, and ice in the track or under a swing gate wear rollers and strain the operator. A few minutes of clearing saves parts.

What Does Gate Welding Cover in Aurora?

Welding on a gate covers the metal structure: hinge and bracket re-welds, cracked frame repair, post reinforcement, and rebuilding a section of a bent or rusted panel. It’s structural work, not cosmetic touch-up. A gate that hangs crooked, drags, or wobbles usually has a weld that’s given way, and the fix is to grind out the old weld, straighten the metal, and re-weld it solid.

We handle both residential and commercial gate welding, from a home swing gate to a heavy commercial slide frame. The metal has to be sound before the weld holds, so we check the surrounding frame and post while we’re in there. A weld that fails in a year because the frame behind it was cracked isn’t a repair, it’s a delay.

Can You Repair My Electric Gate Parts Instead of Replacing Them?

Yes, and often the failing part is the right one to replace. When an electric gate stops, the culprit is usually a specific component: a control board, a receiver, a safety edge, a photo-eye, a limit switch, or the motor assembly itself. We diagnose which part has failed, price the part and the labor, and replace only what’s needed when the rest of the system is sound.

Replacement makes more sense when the operator is running far past its duty cycle, when multiple components have failed at once, or when the part is obsolete and the repair would be a patch. Because we handle both repair and full installation, you don’t need a second contractor if the gate needs a new operator or a new gate altogether. That single-trade focus is the whole point: every technician’s knowledge sits on gate systems, not on a dozen unrelated home services.

Do You Work on My Gate Brand?

We’re experienced with nine gate brands across residential and commercial use. On the residential side, we work on Mighty Mule and Ghost Controls openers common on Aurora driveways, along with LiftMaster, Linear, Viking, and Elite gates. On the commercial and high-cycle side, we work on FAAC, BFT, and DoorKing operators used on business entrances and HOA gates.

Knowing the brand matters because parts, wiring, and control logic differ from one system to the next. A control board on a DoorKing slide operator isn’t the same animal as a receiver on a Mighty Mule arm. When you call, tell us the brand and, if you have it, the model. That’s how we get your gate back up and running with the right part the first time.

Safety First With Electric Gate Parts and Welding

An automated gate has live wiring and an operator that can move heavy panels with real force. Never reach into an operator housing, a control box, or the path of a gate to test a part or clear a jam. Disconnect power at the breaker before touching anything, and leave the electrical side to a trained technician. A gate that starts on its own, runs past its limits, or ignores its safety edge is a hazard and needs to be looked at before it’s used again. Welding carries its own risks around fuel, wiring, and hot metal, so structural repair is a job for someone who does it every day.

Planning the Work With Gate Repair Aurora

If you’re weighing the cost of parts and welding against a new gate, the local picture helps. Aurora’s winters put real stress on gate hardware, so a gate that’s welded solid and running on the right duty-cycle operator lasts longer between repairs. We cover the full range here in Aurora, from a single welded hinge on a home swing gate to a control-board replacement on a commercial operator. Our technicians have up to 9 years of experience, and every job is a gate job.

FAQs – Gate Parts & Welding Cost

How much does gate part repair cost in Aurora?

Most gate part repairs in Aurora cost $180 to $650, with common items like a receiver, rollers, or a safety edge near the low end and a control board or operator assembly toward the top. Call (866) 361-5021 for an exact quote; estimates are free.

How much does gate welding cost in Aurora?

Welding a hinge, bracket, or post typically runs $200 to $500, and rebuilding a damaged frame or panel can reach $650, depending on metal condition and access. Call (866) 361-5021 to book a free estimate.

Is it cheaper to repair or replace an electric gate operator?

Repairing a single failed part, like a control board or receiver, usually costs far less than a full operator replacement, which runs $700 to $1,400 for a residential gate. Repair wins when the rest of the system is sound; replacement wins when the operator is past its duty cycle or parts are obsolete. Call (866) 361-5021 and we’ll tell you which makes sense.

Do you carry parts for my gate brand?

We source parts across nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering residential and commercial gates. Tell us the brand and model and we’ll price the right part. Call (866) 361-5021.

Can you come today?

Same-day service is often possible. Call (866) 361-5021. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Call (866) 361-5021 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and upfront pricing with a written estimate before any work starts.

Pricing reflects the Aurora market as of 2026. Gate Repair Aurora offers free estimates – call (866) 361-5021.

Written by the team at Gate Repair Aurora.

What Our Customers Say

★★★★★ 4.9 from 11+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paul Delaney

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Kevin Anderson

"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."

- Danielle Gallagher
Need Gate Repair help in Aurora? Licensed & insured · 60-minute response · free estimates
Call (866) 361-5021

Request a Free Estimate

Tell us what's going on in Aurora. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7