Gate Installation Cost in Aurora - What It Actually Costs, Quoted Free

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 361-5021

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Gate Installation Cost in Aurora?

Gate installation in Aurora typically costs $3,200 to $9,500 for a residential driveway gate with an operator, and $7,500 to $25,000+ for a commercial or high-cycle automated system. A manual walkway or garden gate runs much less, usually $1,400 to $3,800 installed. The written estimate sets the final price, and we give that estimate free after we see the gate, the posts and the power situation on site.

Those numbers move a lot depending on whether the gate swings or slides, whether power and conduit already reach the post, and whether the operator is a light residential unit or a heavy commercial one. We work on nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule – so our pricing reflects the actual hardware, not a generic package. Call (866) 361-5021 to book a free on-site estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Installation Cost Breakdown (2026)

Here’s how a typical Aurora installation breaks down. These are estimated ranges for planning, and the written estimate you receive after an on-site look is the number that applies. Every line item can shift up or down with site conditions.

Line Item Typical Range What It Covers
Gate panel or kit (residential) $900 – $3,000 Single-leaf swing or slide, standard widths, steel, aluminum or ornamental
Gate panel or kit (commercial/high-cycle) $2,500 – $8,000 Wider leaves, heavier gauge, high-cycle hardware
Residential operator (Mighty Mule, Ghost Controls, Linear, Viking) $450 – $1,400 Motor, control board, receiver, hardware for a residential-grade unit
Commercial operator (LiftMaster, FAAC, BFT, DoorKing, Elite) $1,200 – $4,500 Heavy-duty motor, control board, safety devices, high-cycle rating
Safety devices (photo eyes, edge sensors) $120 – $500 Required for automated gates; more on wider or blind approaches
Conduit, wiring and electrical $400 – $2,200 Runs to the operator, remote or keypad; new trenching adds to the top of the range
Access control (keypad, remotes, intercom) $120 – $900 Depends on number of remotes, keypad type and any intercom hardware
Labor for the install $600 – $2,200 Hanging the leaf, aligning, wiring, testing, setting the limits
Concrete and posts repair $200 – $1,200 Setting new posts or rebuilding existing footings for a stable hinge line

Add it up and you’ll see why the total lands where it does. The operator and the gate panel are the two largest items, and the wiring is the sleeper. If the post is right next to a power source, wiring is a short run and stays low. If we need to trench across a driveway or bring power from a building 80 feet away, that number climbs. The same gate with a residential operator and the same gate with a commercial, high-cycle operator can differ by $2,000 or more, and that has nothing to do with our labor – it’s the hardware.

Anything that keeps existing hardware in place saves money. A gate that replaces an old one on sound posts and functioning conduit is at the bottom of the ranges. A gate going onto a bare opening with no power nearby is at the top.

What Affects Gate Installation Pricing in Aurora

  • Swing or slide. Swing gates work on most residential driveways and are cheaper to install because the operator is simpler. A slide gate needs a clear track path, a support post at each end, and either a rack-and-pinion or a cantilevered setup – heavier hardware and more labor, usually the biggest single jump in total cost.
  • Power at the opening. This is where Aurora installations get interesting. In older neighborhoods, driveways often run back to a detached garage, and the power for that garage may be old or undersized. We need a reliable, code-compliant circuit at the operator, not a long run pulled from a distant outlet. Electrical work is where a local electrician has to be involved, and that’s a line item you’ll see in the estimate.
  • Ground movement and footing conditions. Aurora’s freeze-and-thaw cycle pushes hard against posts, especially near mature trees or on driveways with drainage issues. A gate on a post that’s heaved or wobbling doesn’t stay aligned, and a new operator on a shifted post will bind and fail. Sometimes we rebuild the footing before we hang the gate. That extra concrete work protects the installation.
  • Driveway grade and slope. A sloped driveway changes the swing geometry and the operator mounting. If the gate must swing uphill, the operator has to work harder and the leaf needs a different hinge setup. Estimating without measuring the slope is where most installers get caught, so we measure it on site.
  • New-build vs. replacement. Replacing an existing gate on a working power setup is the cheaper path. A new installation at a bare opening – new posts, new conduit, new operator – is at the top of the ranges. If you’re weighing both, our gate repair Aurora team will tell you honestly whether repairing what you have is the better move.
  • Commercial vs. residential duty. A gate that cycles twenty times a day is residential work. A gate serving a condo entrance, a gated community or a business parking lot cycles hundreds of times a day and needs a commercial operator. FAAC, BFT, DoorKing and LiftMaster commercial units live in that heavier range. Property managers should expect the commercial price band.

How to Save on Gate Installation

There’s no coupon you need to chase here. Most of the savings come from decisions made before the gate goes up.

  • Keep the existing power run if it’s sound. A functioning circuit at the post is the single biggest cost saver. Have your installer test it first rather than assume a full rewire.
  • Right-size the operator. A residential operator is the right call for a residential driveway – jumping straight to commercial hardware you don’t need adds cost without adding value. A gate that’s too heavy for residential hardware, though, will eat the motor, so match the operator to the gate, not to the price.
  • Address post and footing issues now. Rebuilding a wobbling post before the operator goes on saves a repair later. A new motor on a shifted post is money down the drain.
  • Bundle installation with any wiring upgrades. If you’re already trenching or running conduit, do the access control and safety device work at the same time rather than paying for a second visit.
  • Get the free estimate. That’s the real money-saver. Every install is different, and a written estimate keeps you from guessing. Call (866) 361-5021. Estimates are free.

If your gate is failing but the hardware underneath is still usable, replacement isn’t always the answer. Our Aurora service page covers repair options across the brands we work on. A technician who knows LiftMaster and DoorKing boards can often bring a dead operator back without a full swap. That’s the conversation we want to have before any installation quote.

Can You Install a Gate Operator on a Gate I Already Own?

Yes, in most cases – as long as the gate panel, hinges and posts can handle the force of an operator. Retrofitting an existing gate with an automatic operator is common in Aurora, and it usually costs less than a full install. The cost of an operator retrofit typically falls between $1,100 and $3,800 depending on the brand and the wiring needed. We’ll inspect the gate leaf, the hinge line and the post first. A gate that’s too light, too warped or hinged on a rotting post gets a repair-or-replace conversation before we quote a motor. Call (866) 361-5021 to schedule the inspection.

How Long Does Gate Installation Take?

A residential swing gate with an operator is usually a single-day job, and a slide gate or commercial install typically runs two days. Electrical trenching and concrete curing can add time, since new footings need to set before the gate goes on. We’ll give you a realistic timeline with the written estimate rather than a number pulled from thin air.

FAQs – Gate Installation Cost

How much does a driveway gate cost in Aurora?

A residential driveway gate with an operator typically runs $3,200 to $9,500 installed in Aurora. That range covers the gate panel, the operator, safety devices, wiring and labor. A manual gate without an operator costs far less, usually $1,400 to $3,800. Call (866) 361-5021 for an exact quote – estimates are free.

What’s cheaper, a swing gate or a slide gate?

Swing gates are cheaper to automate, typically $1,500 to $3,000 less than a comparable slide gate because the operator is simpler and needs less track and support hardware. Slide gates win when driveway width or slope makes a swing impractical. We’ll tell you which one fits your opening. Call (866) 361-5021.

How much do commercial gate operators cost?

Commercial and high-cycle gate operators installed in Aurora typically run $2,500 to $7,500, with heavier DoorKing and FAAC units at the top of that band. The gate panel, width and wiring run affect the total. Property managers can call (866) 361-5021 for a free on-site estimate.

Is it cheaper to repair or replace a gate?

Usually, repair is cheaper – a repair visit typically runs $180 to $650 compared with a full replacement at $3,200 and up. Repair makes sense when the gate leaf, posts and wiring are sound and the fault is in the operator, board or receiver. Replacement makes sense when the panel is warped, the posts are failing or the operator has reached the end of its service life. We check before we quote. Call (866) 361-5021.

Can you install a gate the same day?

Some installations can be done same day, but a full gate installation usually needs the estimate and site check first. Many operator replacements and residential swing installs run a single day once the hardware is on site. Call (866) 361-5021 and we’ll give you the realistic timeline.

Get a Free Gate Installation Estimate in Aurora

If you’re planning a new automated gate in Aurora, the number that matters is the one on your written estimate. We’ll walk the opening with you, check the posts and the power, and tell you straight whether a repair or a replacement makes sense. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule, for homeowners, landlords and property managers alike, and we handle both residential and commercial systems. Our technicians have up to 9 years of experience, and every job we take on is a gate job.

Call (866) 361-5021 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Pricing reflects the Aurora market as of 2026. Gate Repair Aurora offers free estimates – call (866) 361-5021.

Written by the team at Gate Repair Aurora.

What Our Customers Say

★★★★★ 4.9 from 11+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Paul Delaney

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Kevin Anderson

"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."

- Danielle Gallagher
Need Gate Repair help in Aurora? Licensed & insured · 60-minute response · free estimates
Call (866) 361-5021

Request a Free Estimate

Tell us what's going on in Aurora. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7